Skip to main content

Discs with ABS Rings: ABS Sensor Issue


24 Aug 2020

Category:

When fitting a new disc with an ABS ring, the ring might touch the ABS sensor as corrosions have built up under the mounting point, causing it to be pushed towards the disc.

To fix this issue, remove the ABS sensor from its mounting point and remove the corrosion before refitting the sensor and the new disc.

Similar issues may arise with ABS sensors that are fitted in guide tubes which can be remedied by removing the ABS sensor and cleaning with a suitable reamer.

Previous post

Next post

View all posts

Rotating Electrics Fault Diagnosis Guide

Troubleshooting common misdiagnosis problems with Rotating Electrics. The alternator generates electric current to replace power...

Read More

Timing Chains Tensioner Upgrade - NCK4008 & NCK4034

An upgraded tensioner is available with NAPA Timing Chains. In accordance with BMW OEM standards,...

Read More

10-Tooth vs. 12-Tooth Pinion Drive - NSM1521

Possible visual discrepancy between NAPA Starter Motor and OE. NSM1521 has a 12-tooth pinion drive,...

Read More