Skip to main content

Know How – Technical Bulletin – TB-NST-03


29 Oct 2021

Category:

FITMENT CHALLENGES – WISHBONES AND BALL JOINTS AUDI TT 98-06

When replacing the lower ball joints and wishbones on certain Audi models — including the 1998-2006 Audi TT — It is important to consider and pay attention to the design and geometry adjustments. Here’s a quick guide to help you identify and fit the Audi TT compatible wishbones we stock.

The Solution

1. IDENTIFICATION

Unlike other designs which have circular holes, the OE lower wishbones of Audi TT 1998-2006 applications have slotted ball joint securing points which allow for camber adjustment.

2. FITMENT

After replacing the ball joint and settling the suspension’s weight on the vehicle’s wheels, reset both the caster and the toe to ensure proper handling and prevent excessive tyre wear.

RECOMMENDATIONS

When fitting any steering and suspension part make sure you hand tighten the part before lowering the vehicle and performing a final torque up. Remember: a poorly aligned steering geometry can impact a vehicle’s stability and cause uneven tyre wear, so it is vital to double-check yours after installation.

Become a NAPA Stockist   Download PDF Guide

Previous post

Next post

View all posts

Oil Colour and Associated Myths

Committed to quality, NAPA partnered with Valvoline™ Global Operations to develop a range of high-quality...

Read More

KNOW HOW - TECHNICAL BULLETIN - TB-NFO-01

Fitment Challenges with Oil Filters N.B. Important Information  Please be aware of the differently designed...

Read More

Know How - Expert Edition - Brake Fluid Testing

It can be easy to forget about and neglect your brake fluid, but doing so can result in a total braking failure. For a better understanding of why, how, and when you should be testing (and changing) brake fluid, look no further than NAPA Know How.

Read More